Tag Archives: tractor china

China Good quality Farm Machinery 55HP 4WD Garden Tractor with Hot selling

Product Description

Farm Machinery 55HP 4WD Garden Tractor

1.Product Description
Greenhouse-king series tractor are designed for greenhouse and garden specially, this tractor have all the functions as other tractors. It is the ideal machine for greenhouse and gardens. Small size, it has compact structure and small radius of turning circle. The 2 driving wheel can drive at the same time which suit for different kind of road conditions.
Sales territory: regions like Europe, South America and Australia, Africa and other areas
Matched machines and tools: ploughing tools like disc plough, disc harrow, rotary tiller and cultivator. Optional tools like front loader, backhoe, trailer, mower, rake, spraying machine

General Specification
Products model	DS554 / 550
Wheel drive		4×4 / 4×2
	Dimension(LWH)mm		2620×1250×1160
	Weight(kg)		1250-1290
	Front wheel Tread(mm)		1000,1200,1300 adjustable
	Rear Wheel(mm)		1000,1200,1300 adjustable
	Wheel Base(mm)		1510
	Min. Land Clearance(mm)		235 / 242
	Gear shifts		8F+8R
	Tyre Size		4wd: 6.0-12/11.2-16 2wd: 5.0-12/9.5-20
	Steering gear		Hydraulic steering
	Rear Suspension		Three-point Suspension
	Engine Specification
	Model		JD4102
	Type		Water cooled ,Vertical,4 stroke and Direct injection
	Rated Power(kW)		40.44
	Rated Revolution(r/min)		2300/2400
	Start Way		Electricity Start
	Transmission		4x2x(1+1) shifts
	Clutch		Single chip, Dry friction, Constant conjunction and Single clutch
	PTO Speed		6 spline 540/720

2. Product photos

3. Company Overview
HangZhou Xihu (West Lake) Dis.a Tractor Manufacturing Co.,Ltd. Is located in the world's capital of kite and the city of green power-HangZhou. It is in the Economic Development Area of HangZhou and only 3 kilometers to the expressway station of HangZhou West, the traffic is very convenient
The area of the company and its factory is about 200,000 square meters and is 1 modern private enterprise with research, production and sale. The company has pursued perfect and done things seriously. It has the courage of innovation and has insisted on the production idea of high standard and high quality so its products have been optimized and upgraded constantly. And then the enterprise has developed and grown strong steadily. The company has strong technology force and superior machine and equipments with the auto assembly line which is advanced in China. The products are in strict compliance with the international norms of quality system and have mature guarantee service system so they have adopted 2000 edition ISO9001 international quality management system certificate. Further more, XIHU (WEST LAKE) DIS.A brand products have ever been awarded national patents 10 times by the State Intellectual Property Office.

4.Our Serives.

Warranty time and the Spare Parts
(1). Warranty time
We supply you 2 years warranty time.
(2). Spare Parts
The Easy-damage parts, we will send you together with the tractor for free. And in warranty period, if the spare part is not work because of the quality, we will send you new parts for free.
(3).Tool Box
We will send you the tool Box For free.
(4).Safe & Professional Package
All the tractors are packed in Iron frame steadily or as your required.

5.Implements.(More implements,kindly contact us with free)

6.Contact information.

Web : hxtractor

We are waiting for your inquiry and visiting!

Bushing Application, Type and Compression Capability

Bushings are cylindrical bushings used in machinery. It prevents wear of moving parts and is often used as an enclosure. Bushings are also known as plain bearings or sleeve bearings. You may be wondering what these parts do and how they work, but this article aims to answer all your questions. We'll cover bushing applications, types and compression capabilities so you can choose the right 1 for your needs.
bushing

application

A bushing is a mechanical component that plays an important role in many different fields. In addition to being very practical, it helps reduce noise, vibration, wear and provides anti-corrosion properties. These properties help mechanical equipment in various ways, including making it easier to maintain and reducing its overall structure. The functionality of an enclosure depends on its purpose and environment. This article will discuss some of the most common applications of casing.
For example, in an aircraft, the bushing assembly 16 may be used for the bulkhead isolator 40 . The bushing assembly 16 provides the interfaces and paths required for current flow. In this manner, the sleeve assembly provides a secure, reliable connection between 2 objects with different electrical charges. They also prevent sparking by increasing the electrical conductivity of the component and reducing its resistivity, thereby minimizing the chance of spark formation.
Another common application for bushings is as a support shaft. Unlike bearings, bushings operate by sliding between 2 moving surfaces. As a result, they reduce friction and handling stress, reducing overall maintenance costs. Typically, the bushing is made of brass or bronze. The benefits of bushings are similar to those of bearings. They help extend the life of rotating machines by reducing frictional energy loss and wear.
In addition to identifying growth opportunities and minimizing risks, the Bushing Anti-Vibration Mounts Market report provides insights into the dynamics of the industry and its key players. The report covers global market size, applications, growth prospects, challenges and regional forecasts. The detailed section on Bushing Anti-Vibration Mounts industry provides insights on demand and supply along with competitive analysis at regional and country level.

type

There are several types of bushings. Among them, the SF6 insulating sleeve has the simplest structure and is based on composite hollow insulators. It also has several metal shielding cylinders for regulating the electric field within the enclosure and another for grounding the metal shield. In addition to being lightweight, this sleeve is also very durable, but the diameter of its shield electrode is very large, which means special installation and handling procedures are required.
Linear bushings are usually pressed into the bore of the shaft and provide support as the shaft moves in/out. Non-press-fit bushings are held in place by snap rings or pins. For certain applications, engineers often choose bushings over bearings and vice versa. That's why. Below are some common bushing types. If you need to buy, make sure you know how to tell them apart.
OIP bushings are used for oil-filled cable boxes, and oil-to-oil bushings are used for EHV power transformers. The main components of the OIP enclosure are shown in Figure 7a. If you are considering this type of bushing for your specific application, you need to make sure you understand your specific requirements. You can also consult your local engineering department for more information.
All types of bushings should be tested for IR and capacitance. The test tap should be securely attached to the bushing flange. If damaged bushings are found, replace them immediately. Be sure to keep complete records of the enclosure for routine maintenance and any IR testing. Also, be sure to pay attention to tan d and thermal vision measurements.
bushing

Compressive ability

There are several things to consider when choosing an enclosure. First, the material. There are 2 main types of bushings: those made of filled Teflon and those made of polyester resin. The former has the highest compressive strength, while the latter has a lower compressive capacity. If you need small amounts, glass-filled nylon bushings are the most common and best option. Glass-filled nylon is an economical material with a compressive strength of 36,000 lbs.
Second, the material used for the enclosure must be able to withstand the load. For example, bronze bushings can cause metal shavings to fall into the papermaking process. CG materials can withstand very high levels of moisture, which can damage bushings that require lubrication. Additionally, these materials can operate for extended periods of time without lubrication. This is particularly advantageous in the paper industry, since the casing operates in a humid environment.
In addition to the material and its composition, other characteristics of the enclosure must also be considered, including its operating temperature. Although frictional heat from moving loads and the temperature of the bushing itself can affect the performance of the bushing, these factors determine its service life. For high temperature applications, the PV of the enclosure should be kept low. On the other hand, plastic bushings are generally less heat resistant than metal bushings. In addition, plastic sleeves have a high rate of thermal expansion. To avoid this, size control is also important.
Low pressure bushings have different requirements. An 800 MVA installation requires a low voltage bushing rated at 14 000 A. The palm assembly of the transformer also features a large central copper cylinder for electrical current. The bushing must withstand this amount of current and must maintain an even distribution of current in the transformer tank. If there is a leak, the bushing must be able to resist the leak so as not to damage the transformer.

cost

The cost of new control arm bushings varies widely. Some parts are cheaper than others, and a new part is only $200. However, if you replace the 4 control bushings in your car, the cost can exceed $1,200. The cost breakdown for each section is listed below. If you plan to replace all four, the cost of each bushing may range from $200 to $500.
The control arm bushing bears the brunt of the forces generated by the tire and is parallel to the direction of the force. However, over time, these components wear out and need to be replaced. Replacing 1 control arm bushing costs between $300 and $1,200. However, the cost of replacing each arm bushing depends on your car model and driving habits. The control arm bushings should last about 100,000 miles before needing replacement.
The repair process for control arm bushings is time consuming and expensive. Also, they may need to remove the heat shield or bracket. In either case, the procedure is simple. Stabilizer bar brackets are usually attached with 1 or 2 mounting bolts. They can also be secured with nuts or threaded holes. All you need is a wrench to remove them.
The control arm bushings are made of 2 metal cylinders and a thick rubber bushing. These parts can deteriorate from potholes, off-roading or accidents. Because they are made of rubber, the parts are more expensive than new. Buying used ones can save you money because you don't need to install them yourself. However, if you do plan on fixing a luxury car yourself, be sure to find 1 that has a warranty and warranty.
bushing

maintain

To prevent your vehicle from overheating and leaking oil, a properly functioning bushing must be used. If the oil level is too low, you will need to check the mounting bolts to make sure they are properly tightened. Check gasket to ensure proper compression is applied, replace bushing if necessary. You should notify your vehicle manufacturer if your vehicle is immersed in oil. Whenever an oil leak occurs, it is very important to replace the oil-filled bushing.
Another important aspect of bushing maintenance is the detection and correction of partial discharges. Partial discharge is caused by current entering the bushing. Partial discharge can cause tree-like structures, cracks and carbonization in the discharge channel, which can eventually damage the casing. Early detection of these processes is critical to ensuring that your vehicle's bushings are properly maintained. Identifying and repairing partial discharges is critical to ensuring optimal operation, regardless of the type of pump or motor.
To diagnose casing condition, perform several tests. You can use tan d measurement, which is a powerful tool for detecting the ingress of water and moisture. You can also use power factor measurements to detect localized defects and aging effects. You can also check the oil level by performing an infrared check. After completing these tests, you will be able to determine if there is enough oil in the casing.
If the oil level in the transformer is too low, water and air may leak into the transformer. To avoid this problem, be sure to check the MOG and transformer oil levels. If the silicone is pink, replace it. You should also check the function of the oil pump, fan and control circuits annually. Check the physical condition of the pump and fan and whether they need to be replaced. Clean the transformer bushing with a soft cotton cloth and inspect for cracks.

China Good quality Farm Machinery 55HP 4WD Garden Tractor with Hot selling

China Custom 3 Point Pto Tractor Hitch Post Hole Digger wholesaler

Product Description

Specifications
1.; Farm hole digger or tree hole digger
2.; Hole digger for tractors use
3.; Power required:; 20-30 HP
4.;4" 6" 9" 12",; 14",; 16",; 18",; 20".;
Packing size:; 160&ast;44&ast;45cm
Packing material:; Iron pallet.;

Lefa Company:;
We have 11 years producing and exporting experience.;

We are running 3 companies.;
1.; HangZhou CZPT Industry and Trade Co.; Ltd.;
2.; HangZhou Hanma Machinery Co.; Ltd
3.; CZPT Europe ( set up in France);

Our partners:;
Our partners are mainly in Western Europe.; Other customers including Middle East,; Russia,; Brazil,; and Canada,; New Zealand,; etc.;

Welcome to be our new partner.;

Our tractors spare parts suppliers:;
We also have more than 20 tractor spare parts suppliers.; We design and pay the tolling charges.; The audited suppliers produce for us.;
We keep stock in our warehouse to ensure the in time delivery.;

The warranty:;
The machine:; 14 months.;
Spare parts:; Life time spare parts service.;
Loading Port:; ZheJiang port

Quality:;
All of our machines designed and produced by Europe Standard.;
All the machines are with CE certificate.;

Sample machines:;
We also provide sample machines for quality confirmation.;
We will give a reasonable MOQ in order to save your cost.;

Lead time:;
We usually have sample machine in our warehouse.;
If we have stock,; we will deliver once we get your payment.;

If we do not have stock,; the lead time is around 20-30 days.;

New machines development:;

Our engineers are with more than 10 years experience machines development.;
We can develop new machines according to your needs and the market.;
We have quick response to the machines optimization.;

Shipment:;

If you want to mix the different models or different machines in 1 shipment,; we accept that.;

Model	size(mm);	Max hole diameter(cm);	Power(HP);	kilos	Packing (mm); 2pc/iron box
HG-4"	1700&ast;720&ast;1860	100	20-30	65	1700&ast;500&ast;500
HG-6"	1700&ast;720&ast;1860	152	20-30	75	1700&ast;500&ast;500
HG-9"	1700&ast;720&ast;1860	228	20-35	85	1700&ast;500&ast;500
HG-12"	1700&ast;720&ast;1860	305	25-35	95	1700&ast;500&ast;500
HG-14"	1700&ast;720&ast;1860	355	35-50	105	1700&ast;500&ast;500
HG-16"	1700&ast;720&ast;1860	406	35-50	115	1700&ast;500&ast;500
HG-18"	1700&ast;720&ast;1860	457	35-50	125	1700&ast;500&ast;500
HG-20"	1700&ast;720&ast;1860	508	35-50	135	1700&ast;500&ast;500

LEFA machines in YOUTOBE web for your reference:;
https:;//cnlefa.;en.;made-in-china.;com    EFG FLAIL MOWERS
https:;//cnlefa.;en.;made-in-china.;com      EFGL HYDRAULIC FLAIL MOWERS
https:;//cnlefa.;en.;made-in-china.;com     FM FINISHING MOWERS
https:;//cnlefa.;en.;made-in-china.;com    TM CZPT MOWERS
https:;//cnlefa.;en.;made-in-china.;com     EFDL HYDRAULIC FLAIL MOWERS
https:;//cnlefa.;en.;made-in-china.;com      RT ROTARY TILLERS

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.
screwshaft

Major diameter of a screw shaft

A screw's major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4" is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its 2 outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it's a good idea to measure the section of the screw that's least used.
Another important measurement is the pitch. This measures the distance between 1 thread's tip and the next thread's corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in 1 turn. While lead and pitch are 2 separate concepts, they are often used interchangeably. As such, it's important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are 3 different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw's major diameter is the largest diameter, while the minor diameter is the lowest. A nut's major diameter, or the minor diameter, is also called the nut's inside diameter. A bolt's major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named "British Standard Whitworth" became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from 1 manufacturer to another, so it's important to know what size screw you're looking for.
In addition to the thread angle, a screw's major diameter determines the features it has and how it should be used. A screw's point, or "thread", is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
screwshaft

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than 1 made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each 1 will have different applications. Listed below are the different materials used for screw shafts. If you're looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft's major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between 2 and 16 millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are 2 basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
screwshaft

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw's pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can't be adjusted. And if it can't fit a shaft with the required diameter, then it isn't a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.

China Custom 3 Point Pto Tractor Hitch Post Hole Digger wholesaler

China Standard CZPT 4WD 20HP Wheel Farm Tractor (JINMA 204) near me factory

Product Description

CZPT offers a broad range of tractors from 16 HP to 125 HP. The brand is present in more than 100 countries and areas across 5 continents. The series tractors are approved by OECD and the main range of tractor already got E-MARK Certificate.
JINMA offers a wide choice of features across the full range of tractors. Power steering, 2WD/4WD options, Cabin, Roll Over Protection bar, canopy, Choice of tyres i. e turf tyres, industrial tyres, High lug tyres are available across the range.
JINMA owns the range of features, makes it 1 the most suitable tractors for a host of applications. The tractors are suitable for garden applications, hobby applications, wet & dry land applications, transportation in plain or hilly areas.
JINMA 's utility of the tractor is further enhanced by the offering of a complete range of matching implements like loaders, backhoe, post hole digger, scraper, leveler, rotavator, tiller, cultivator, plough, harrows, wood chipper, mower, snow
Blower etc.
JINMA offers the backed up by trained manpower, spares parts & service supports at the nearest distribution point in all the countries.
The CZPT brand of tractors are being built to give a totally satisfying experience to the customers.

Tractor Parameters	Model			JM-204
	Drive Type			4WD
	Overall Dimensions L×W×H(mm):			3080×1280×1930
	Wheel Track (mm)	Front		1000,1100
		Rear		1040-1200
	Wheel Base(mm)			1645
	Ground Clearance (mm)			295
	Rated Traction Force(N)			4800
	Construction Mass(kg)			1120
	Min.Turning Radius(m)			2.5
	Theoretical Speed(Without creeper) ( km/h)		Forward	1.68,3.31,5.52,7.75,15.30,25.50
			Reverse	1.33,6.15
	Theoretical Speed(With creeper)(km/h)		Forward	0.31,0.62,1.03,1.45,2.85,4.76
			Reverse	0.25,1.15
Engine Specifications	Model			LL380T/Y380
	Type			3-Cylinder Vertical, water cooled,4 stroke cycle
	Rated Power (kw/hp)			14.7/20
	Rated Speed (rpm)			2400
	Bore×Stroke (mm)			80×90
	Total Displacement (L)			1.357
Drive System	Clutch			Dual-Stage
	Gear Box			(3+1)×2
	Main Drive			One Pair of Spiral Bevel Gearing
	Differential			Bevel Gear
	Differential Lock			Jaw Lock
	Final Transmission			External gearing, Spur Gear
Traveling Mechanism	Tire	Front		6.00-12
		Rear		8.3-24
	Steering Gear			Full Hydraulic Steering
	Brake			Shoe type
Working Device	Hydraulic System	Lifting Capacity at 610mm Behind Lift Point (N)		3600
		3-Point Suspension		Category :I
	P.T.O Shaft	Speed (rpm)		540/1000
		Spline Size		6-§35Rectangular Spline

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the 2 wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The 2 pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It's very useful and can be a great addition to your child's science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to 1 end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use 2 or more wheels to transmit force. Compound pulleys have 2 or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across 4 steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company's website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the 2 wires. The other pulley reverses the direction of the force, but that doesn't add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope 4 times reduces the force required to lift 1 foot. Likewise, if the pulley system had 4 pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is 3 times the length of the rope, it will be more than 3 times the required length.

China Standard CZPT 4WD 20HP Wheel Farm Tractor (JINMA 204) near me factory

China Hot selling 60-80HP Agricultural Tractor Mounted Front Shovel Pusher Snow Grader with Great quality

Product Description

60-80HP Agricultural Tractor Mounted Front Shovel Pusher Snow Grader

Product Description

Tractor Mounted Front Shovel is used in removing of push the soil or snow with quick speed and high efficiency.It's also used in clearing away or stocking of loose material.
Hydraulic transmission is used,featured with compact structure,flexibility,convenient operation and quick mounting and dismounting.It uses hydraulic oil commonly with tractor.The hydraulic elements are standardized,convenient for operation and service.

Detailed Photos

Product Parameters

These are the model of the tractor soil snow shovel, mechanical or hydraulic optional.

Model	TT150	TT165	TT180	TT200
Overall width	1500mm	1650mm	1800mm	2000mm
Working width	1500/1300mm	1650/1430mm	1800/1560mm	2000/1800mm
Blade angle	0/0,16,30 degree	0/0,16,30 degree	0/0,16,30 degree	0/0,16,30 degree
Shoveling angle	60 degree	60 degree	60 degree	60 degree
Weight	220/300kg	240/320kg	300/360kg	330/400kg
Types	mechanical / hydraulic	mechanical / hydraulic	mechanical / hydraulic	mechanical / hydraulic

More Images Show

Mechanical direct connection and direct push, no steering function.

---

Hydraulic steering function →

Packaging & Shipping

Generally the tractor and attachment will be packed by a whole container or by LCL, custoners can choose any way. If by LCL, our company will pack goods by Iron frame or plywood.

Company Profile

HangZhou AOS International Co., Ltd is professional supplier and manufacturer for all kinds of farm and agricultural tractor. Our factory has been established for 15 years and is specialized in researching, producing and distributing.
Notice:Our tractor is mainly used for farming and wooden working, not for transportation. Cab, anti-over frame and sun shade is optional, you can choose it just according to your requirement. We also have many attachment that can work together with tractor, the pictures below is just for your reference.such as: Front loader; Backhoe; Lawn mower; Rotary tiller; Trailer;Snow grader etc..

FAQ

1, What tractors can you match the attachments tools?
--- We can supply the tools for tractors from 25hp to max 260hp.

2,What is the lead time normally?
-- About 10-15days after getting the deposit money from client;

3,What is the payment terms?
-- T/T. 50% deposit in advance and 50% balance before shipment;

4,How about the shipment method?
-- Normally, if only 1 tractor without cab, we will make plywood case with steel frame packing to pack the tractor and do LCL shipment; If the tractor with cab, we suggest to use 1 single container to ship it.

5, How about your quality control?
--We have engaged in the tractor field for many years, now we have our own brand and have passed the EU CE certification, the quality is ensured.

6, How about your warranty and after-sale service?
---The warranty for the tractor is 1 year, if any part broken within 1 year, we will send the parts to client by express.
If there is question about the operation or using, we will give technical support to CZPT client to do well.

7, Any free spare parts supply for the tractor?
--- Normally, we will give extra oil and diesel fitlers for spare parts.But it depends the order quantity.

Types of agricultural parts

Agricultural parts can be divided into different categories. These components include tractors, moldboard plows, whips and sickles. Some of the different types of agricultural ingredients are listed below. Each of these parts is important for different types of farming. It is important to know the purpose of each and what it does. If you are a farmer or plan to become a farmer, these parts are critical to your operation.
agriculturalparts

Tractor

The first tractor appeared in the 1920s. Ford and International Harvester were among the first companies to produce farm tractors, but the industry has grown rapidly. By the 1920s, hundreds of companies were producing farm tractors. The agricultural depression of the 1930s forced many of these companies out of business. By the 1930s, only 7 companies were major players in the tractor business. Ford produced the largest number of wheeled tractors in the United States between 1930 and 1955.
Some tractors are equipped with various accessories to enhance their performance. These specialized agricultural components are used for a variety of tasks. These include tillage, harvesting, planting and material handling. Tractors vary in horsepower, lift capacity, control and capabilities. Some models also have device mounting options. The downside of this is that if you need to use the tractor for other purposes, you will have to use additional attachments that can damage the tractor.
Modern tractors have a clutch pedal on the gear lever. This allows you to shift quickly without pedaling. Other tractors have a throttle speed button that improves hydraulic flow to the implement. However, the most important component of a tractor is the engine. Tractors must be driven safely because even minor accidents can cause serious damage to farm equipment. While there are many tractors that can operate without these parts, you can find the right tractor for your job.

Shared plows

One of the many uses of shared plows as part of agriculture is to increase the amount of soil in a field. This plow effectively removes compacted soil and lifts weed roots. According to the University of Nebraska-Lincoln Institute for Agriculture and Natural Resources, plowshares are best used in the fall, when weeds are less active and the soil is more fertile.
The basic plowshare can be adjusted by raising or lowering the plowshare to suit runners in the furrow. However, this design is not suitable for breaking up the heavier soils of northern Europe. In the 6th century, however, the advent of the wheel made it possible to use larger moldboards, which increased food production and population growth. Today, farmers in North America have access to a wide variety of moldboard plows.
Agricultural moldboard plows come in 2 basic styles, horse-drawn or tractor-style. Horse-drawn models have 1 bottom, while tractor-pulled moldboard plows have 1 to 14 hydraulically raised bottoms. Other variants include intermediate breakers and twin moldboard plows. Agricultural moldboard plows are often used in the Midwest and elsewhere.

Grass

Grass is used for mowing. The blade is double edged and bolted to the wooden handle. Steel blades are tempered and braced for strength and durability. The blade can be sharpened if necessary. The straw whip is 30 inches long, which can be a good or a bad thing depending on the user's height. Blades can be sharpened with sandpaper or a file.
The traditional straw whip 32 includes a rear panel and horizontal shelves. It also features a hollow handle with an adapter at the proximal end and a carrying handle at the distal end. The first cable goes to the power supply and goes through the case and handle. After pulling the cable taut, the straw will be firmly attached to the small holder 8.
The suction tube 32 is connected to an electrical connection 47 that powers the device. A battery pack is provided for use away from the tractor. It is a plastic or metal box and consists of 2 parts: a rechargeable battery 67 and a female electrical plug 68. The switch locks in the open position to prevent accidental use. The switch is also equipped with a safety lock button. These 2 components work together to operate the straw.
agriculturalparts

Scythe

Although it is generally believed that the scythe was first developed in Roman times, its actual development may be earlier. Pliny mentioned 2 different types of sickles, Gallic and Roman. The Gallic sickle was the longer of the 2 and was made of mild steel, while the Roman sickle was made of harder, higher carbon steel.
In the past, people cut wheat by hand with a sickle. They replaced scythes and bagging hooks, which required users to bend over to harvest crops. Although they have largely been replaced by tractor machinery, scythes are still used today in parts of Asia and Europe. The sickle can also reach awkward corners, making it more useful in certain types of cuts.
The sickle belt stretches from Europe to the Middle East and the Midwest of the United States and Canada. It also spans most of Russia, the Middle East and North Africa. In the 19th century, Austrian sickle makers dominated the sickle industry. They produced millions of sickles, some dating back to the 1500s. Some of them were exported to India and the former Soviet Union.

Brushcutter

Brushcutters are powerful agricultural tools used primarily for felling and trimming vegetation. These parts are often multifunctional, and some models are even capable of maintaining road edges and ditches. Some models can even trim branches from certain types of trees. Before you buy your own brush cutter, be sure to read the manual carefully and follow the safety rules. For your own safety and the safety of others, please wear a hard hat, eye and hearing protection, padded gloves, long pants, and boots, and keep young children away from work areas.
Brushcutters are usually attached to the tractor via a 3-point linkage system, with the exception of high reach models that are attached to the tractor via fixed stirrups. Additionally, brush cutters often have a balancing mass located opposite the tractor. These agricultural components are complicated to install, but once installed, they remain coupled to the tractor. A brush cutter is a critical piece of equipment on any tractor.
Most brushcutters use hydraulic engines. The power is transmitted mechanically through a PTO (power take-over) mechanism or a cardan shaft, which turns a hydraulic pump. This pump draws hydraulic oil from a special tank and then sends it through a series of distributors to move the arm and the working organ. As a result, the power of the brush cutter is transferred from the tractor to the working organ by a hydraulic engine.
agriculturalparts

Transplanters

Transplanters for agricultural parts are equipment used to plant seedlings into soil. These machines are used in greenhouses and open fields to increase productivity, yield, and the success of harvesting transplanted crops. Transplanters are typically made of steel and are designed to fit seedlings of all shapes and sizes. Buying a used transplanter is a good idea as long as the working parts are in good condition. When considering a used model, you should inspect it for cracks or corrosion and broken parts.
A mechanical transplanter works faster than hand transplanting, but it becomes slower as your quads and back start hurting. Water-wheel transplanters have become popular in recent years. By automatically delivering water into the holes where the transplants are set, water is delivered to the root system without the need for manual intervention. Moreover, water-wheel transplanters save time on watering. John Good, a farmer who uses a water-wheel transplanter, says that speed is no different between a mechanical transplanter and a water-wheel one.

Cultivatorsw

The basic purpose of cultivators is to turn soil and plant matter into a workable form for the crops. Cultivators are used by both large and small farmers. Cultivators for small farming operations are usually self-propelled, but may be drawn behind a tractor. Two-wheel cultivators are typically fixed and powered by couplings, while four-wheel cultivators are attached via a three-point hitch and operated by power take-off. Some cultivators are still drawn behind a draft animal, and the methods are still used in many developing countries.
Cultivators are used in farming to break up soil around a crop. There are 3 different kinds of cultivators: row crop cultivators, disc cultivators, and power cultivators. Row crop cultivators are used to break up soil before planting, while harrows are used to prepare the soil for planting. In both cases, cultivators are used to disturb the soil consistently throughout the working width. In general, cultivating soil improves aeration and disrupts photosynthesis. Moreover, it can decrease water ponding time after heavy rainfall.
Cultivators are important parts of agricultural machinery. They aerate soil, prepare the seedbed, and kill weeds. By disrupting the soil, cultivators are used to evenly distribute chemical applications. Among them, glyphosate is the most common and widely used weed killer. It is safe for farmers to use, and it effectively eliminates most weeds in a single application.

China Hot selling 60-80HP Agricultural Tractor Mounted Front Shovel Pusher Snow Grader with Great quality

China Custom 70HP Yto/Foton Lovol/John Deere/New Holland/Dongfeng/Four Wheel Compact Agriculture Hand Traktor Mini Small Farm Walking Agricultural Electric Tractor 50HP with high quality

Product Description

70HP YTO/Foton Lovol/John Deere/New holland/Xihu (West Lake) Dis.feng/Four Wheel Compact Agriculture Hand Traktor Mini Small Farm Walking Agricultural Electric Tractor 50HP

This series tractor is 4wd model and with reasonable structure. Our company research and develop the new type special gearbox and rear axle, with the synchronizer shifts + shuttle shifts, bolder half shaft, stronger gears and reinforced brake assembly.

Sales Territory: Regions like Europe, South America and Australia, Africa and other areas
Matched Machines and Tools: Ploughing tools like disc plough, disc harrow, rotary tiller and cultivator. Optional tools like front loader, backhoe, trailer, mower, rake, spraying machine.

LIFTOR Tractor Features:

1. For the front axle, the tractor use special high power electric hydraulic differential lock.

2. The hydraulic steering, make the operation much more flexible, and much more suitable for any different working environment Weichai-Deutz engine, and the special 16 inch double clutch, make the tractor much more powerful;

3. The electric hydraulic clutch, independent driving and braking system, make the operation much convenient and labor-saving Double speed power output(PTO), multi-way hydraulic output, and unlimited adjustable rear wheel tread, suit for a variety of agricultural farm implements requirements.

4. The tractor can be equipped with new special luxury air-conditioned cabin, which is safe, comfortable and convenient on maintenance.

Tractor Parameter:

TG series tractor(180hp-220hp)
Product model	HX1804(180hp)	HX2104(210hp)	HX2204(220hp)
Wheel drive	4×4
Dimension(LWH)	5400×2460×3140mm
Weight	8000kg
Front wheel tread	1990mm
Rear wheel tread	1840(1820-1910)mm
Wheel base	2890mm
Min land clearence	430mm
Gear shifts	16F+16R
Tire size	16.9-28/20.8-38
Steering gear	Hydraulic steering
Rear Suspension	Three point suspension
ENGINE SPECIFICATION
Engine model	Weichai
Engine type	Water cooled, vertical, 4 stroke and direct injection
Rated power(kw)	132.3	154.4	161.7
Rated revolution	2300/2400 r/min
start way	Electric start
Transmission	4×4×(1+1) shifts
Clutch	Dry friction, double stage clutch, seperate operation
PTO speed	6 splined 540/1000

LIFTOR Tractor Pictures:

Optional Implements for Tractor :

About US:

"Liftor Enterprises" is a high-tech enterprise professionally specialized in R&D, production, sales, service of electric storage,intelligent industrial system, agriculatural tractor, lifting machine and wheel loader. It is located in HangZhou, ZheJiang Province with advanced forklift manufacturer technology, processing equipment and perfect product testing center.

Our company is the China Automobile Industry Association member unit. We won the honorary title such as "Outstanding Enterprise of Quality Management, Credibility and Service AAA level", "National Enterprise of Good Creditworthiness", "National Quality Management Advanced Enterprise" etc. The company has already passed the safety production standardization and the quality authentication of ISO9001:2008 and European Union CE certification, fit-out national patent certificate.

Our main equipment are agriculatural tractor, lifting machine, wheel loader and forklift. It is widely used in various places of modern logistics.

FAQ:

1. Manufacturer or Trading Company?
We are leading tractor manufacturer for 20 years, and specialize in 12-240Hp tractors in China.

2. MOQ: Mini tractor: 8 units; Middle tractor(25-40hp): 2 units; Above 50hp: 1 unit

3. Spare Parts: Free toolbox and easy damaged parts.

4. Shippment: We can help you arrange shippment.

5. Delivery Time: Usually 25 days. In CZPT season,30-40 days

6. Warranty Time: Complete service system, 12 months since arrival of destination port

7. Payment Terms: We accept 30%T/T in advance, and 70% T/T before delivery

8. Tractor Options: Can be equipped with ROPS, Canopy, Cabin, AC Cabin, Air Brakes, Hydraulic Valve Out, Paddy Tire or as per your requirements.

9. Tractor Logo: We have our own logo. And we also can put your logo for free.

10. Package and Loading: (1).complete tractor package: 2 units/20GP, 4 units/40HQ;(2).Iron Frame Package: 8 units/20GP, 16 units/40HQ

11. Tractor Implements: Rotary tiller, disc plow, furrow plow, cultivator, front end Loader, backhoe, Mower, Trailer, Snow Blower or as per your requirements.

12. Part supply: Complete Parts Workshop, and can supply all parts

Axle Spindle Types and Features

The axle spindle is an integral part of your vehicle's suspension. There are several different types and features, including mounting methods, bearings, and functions. Read on for some basic information on axle spindles. The next part of the article will cover how to choose the correct axle spindle for your vehicle. This article will also discuss the different types of spindles available, including the differences between the rear and front bearings.
Driveshaft

Features

The improved axle spindle nut assembly is capable of providing additional performance benefits, including increased tire life and reduced seal failure. Its keyway features and radially inwardly extending teeth allow nut adjustment to be accomplished with precision. The invention further provides a unique, multi-piece locking mechanism that minimizes leakage and torque transfer. Its principles and features are detailed in the appended claims. For example, the improved axle spindle nut assembly is designed for use in vehicles that are equipped with a steering system.
The axle spindle nut assembly includes a nut 252 with threads 256 on its inner periphery. The axle spindle 50 also features threads 198 on its outer periphery. The nut is threaded onto the outboard end of the axle spindle 50 until it contacts the inboard surface of the axle spacer 26. In the assembled state, a bearing spacer 58 is also present on the axle spindle.
The axle spindle nut assembly can reduce axial end play between the wheel end assembly 52 and the axle spindle 50. It can be tightened to an extreme torque level, but if the thread faces separate, it will undercompress the bearing cone and spacer group. To minimize these disadvantages, the axle spindle nut assembly is a critical component of a wheel-end assembly. There are several types of axle spindle nuts.
The third embodiment of the axle spindle nut assembly 300 comprises an inner washer 202, an outer washer 310, and at least 1 screw 320. The axle spindle nut assembly 300 secures and preloads bearing cones 55, 57. Unlike the first embodiment, the axle spindle nut assembly 300 uses the inner washer 202, which is optional in the third embodiment. The inner washer 202 and outer washer 310 are similar to those of the first embodiment.

Functions

An axle spindle is 1 of the most important components of a vehicle's suspension system. The spindle retains the position of bearings and a spacer in an axle by providing clamp force. The inner nut of an axle spindle should be properly torqued to ensure a secure fit. A spindle nut is also responsible for compressing bearings and spacers. If any of these components are missing, the spindle will not work properly.
An axle spindle is used in rear wheel drive cars. It carries the weight of the vehicle on the axle casing and transfers the torque from the differential to the wheels. The axle spindle and hub are secured on the spindle by large nuts. The axle spindle is a vital component of rear wheel drive vehicles. Hence, it is essential to understand the functions of axle spindle. These components are responsible for the smooth operation of a vehicle's suspension system.
Axle spindles can be mounted in 3 ways: in the typical axle assembly, the spindles are bolted onto the ends of the tubular axle, and the axle is suspended by springs. Short stub-axle mounting uses a torsion beam that flexes to provide a smooth ride. A second washer is used to prevent excessive rotation of the axle spindle.
Apart from being a crucial component of the suspension system, the spindles of the wheels are responsible for guiding the vehicle in a straight line. They are connected to the steering axis and are used in different types of suspension systems. European cars use a MacPherson Strut suspension system in which the spindle is connected to the arms in the front and rear of the suspension frame. The MacPherson strut allows the shock absorber housing to turn the wheel.
Driveshaft

Methods of mounting

Various methods of mounting axle spindle are available. In general, these methods involve forming a tubular blank of uniform cross section and thickness, and receiving the bearing assembly against it. The spindle is then secured using a collar, which also serves as a bearing stop. In some cases, additional features are used to provide greater security. Some of these features may not be suitable for all applications. But they are generally suitable.
Axle spindle forming is usually done by progressive steps using hollow punches. The metallic body of the punch has an inner work surface, which receives the axle blank. A mandrel is fixed within the work opening of the punch. The punch body's work surface forges the spindle about the mandrel. The punch has 2 ends, a closed and an open one.
A wheeled vehicle axle assembly (10) includes a cylindrical housing member (12 a) and a plurality of spindle mounting flanges (30) secured on the housing member. The spindles (16) are firmly attached to the housing member by means of coupling members. The coupling members are configured to distribute the bending loads imposed on the spindle by the axle. It is important to note that the coupling members can be either threaded or screwed.
Traditionally, axle spindles were made from tubular blanks of irregular thickness. This method allowed for a gradual reduction in diameter and eliminated the need for extra metal within the spindle. Similarly, axles made by cold forming eliminate the need for additional metal in the spindle. In this way, the overall cost of manufacture is also reduced. The material used for manufacturing axles also determines the size and shape of the final product.
Driveshaft

Bearings

A nut 16 is used to retain the wheel bearings on axle spindle 12. The nut comprises several parts. The first portion includes a plurality of threads and a deformable second portion. The nut may be disposed on the inboard or outboard end of the axle spindle. This type of nut is typically secured to the axle spindle by a retaining nut.
The bearings are installed in the spindle to allow the wheel hub to rotate. While bearings are greased, they can dry out over time. Consequently, you may hear a loud clicking sound when turning your vehicle. Alternatively, you may notice grease on the edges of your tires. Bearing failure can cause severe damage to your axle spindle. If you notice any of these symptoms, you may need to replace the bearings on your axle spindle. Fortunately, you can purchase the necessary bearing parts at O'Reilly Auto Parts.
There are 3 ways to mount an axle spindle. A typical axle assembly has the spindles bolted to the ends of the tubular axle. A torsion beam is also used to mount the spindles on the axle. This torsion beam acts like a spring to help make the ride smooth and bump-free. Lastly, the axle spindle is sometimes mounted as a bolt-on component.

Cost

If your axle spindle has been damaged, you may need to have it replaced. This part of the axle is relatively easy to replace, but you need to know how to do it correctly. To replace your axle spindle, you must first remove the damaged one. To do this, a technician will cut the weld. They will then thread the new 1 into the axle tube and torque it to specification. After that, they will weld the new axle spindle into place.
When you are thinking about the cost of an axle spindle replacement, you must first determine if it is worth it for your vehicle. It is generally a good idea to replace the spindle only if it is causing damage to your vehicle. You can also replace your axle housing if it is deteriorating. If you do not replace the spindle, you can risk damaging the axle housing. To save money, you can consider using a repair kit.
You can also purchase an axle nut socket set. Most wrenches have an adjusting socket for this purpose. The socket set should be suitable for most vehicle types. Axle spindle replacement costs around $500 to $600 before tax. However, you should be aware that these costs vary widely based on the type of vehicle you have. The parts can cost between $430 and $480, and the labor can cost anywhere from $50 to 70.

China Custom 70HP Yto/Foton Lovol/John Deere/New Holland/Dongfeng/Four Wheel Compact Agriculture Hand Traktor Mini Small Farm Walking Agricultural Electric Tractor 50HP with high quality

China Hot selling CZPT Angle Adjustable Mower Black PVC Tractor Forklift Seat Fit Forklift Skid Loader with Great quality

Product Description

Universal Tractor Seat Replacement
The tractor seat fits multiple applications to add maximum comfort by helping reduce vibrations, which will keep you moving forward in every type of rough terrain. It is suitable for medium to large horsepower tractors, telescopic handlers, combine and forage harvesters and small-wheeled loaders.
Easy to Install & Replace - The replacement seat is easy to install and remove. Slide rails installation is a kick-off for a mechanically inclined person. All necessary parts and accessories are included in the package.
Universal Replacement -This suspension tractor and forklift seat can be installed on Bobcat tractors and others of the same size.

STURDY & DURABLE - The frame of the tractor seat is made of rigid and sturdy steel. And the PVC cushion can stand up to constant exposure to water and sun.
VERSATILITY & COMFORT - The forklift seat is designed with a backrest with a 15° adjustment for your comfort, and with slide rails for distance adjustment in horizontal 5.9 inches.
ALTERNATIVE LOAD CAPACITY - The handle on the right side of the backhoe seat replacement allows the most suitable weight class for you to provide the most comfortable sitting experience.
EXCELLENT PERFORMANCE - The lawnmower seat shows a compact size of 22"x18.5"x18" and ergonomic design. Besides, it is convenient for you to install and remove the seat.
UNIVERSAL FITMENT - This suspension tractor and forklift seat can be installed on Bobcat tractors and others of the same size.
The tractor seat replacements feature a backrest with a 15° adjustment. They are also designed with slide rails for distance adjustment.The handle on the right side allows the most suitable weight class to provide the most comfortable sitting experience.The lawn tractor seat's shape is fit for the human bodies, providing mechanical lumbar support to help prevent lower back pain. Meanwhile, it is endowed with a unique look

Technical Data
Fore/aft adjustment	150mm. Each step: 15mm
Backrest angle adjustment	8°
Seat Size	485515485mm
Rail Size	230285/328285mm
Cover material	black PVC,or can be made according to customer's requirement
Main parts	Iron plate +High quality foam + High quality PVC+Cushion
Options	Armrest Safety Belt Micro Switch Suspension
Application Vehicles	Forklift, truck, tractor, excavator, lawn mower, sweeper, garden tractor, construction machinery, agricultural machinery. mini excavator

Detailed Photos

Packaging & Shipping

Model NO. YY01

Sample Delivery Solution - For samples, usually we will choose Air delivery or Express delivery. Fast and convenient. More cost-effective than sea shipping according to our calculation. Anyway, we will select the best method for you.

Batch Delivery Solution - For Batch goods, usually we will choose sea shipping. More cost-effective than other methods. Any requirement will be considered for better business cooperation.

Specification
QTY for Container	344pcs/20'GP 640pcs/40'GP
G.W	10.4kgs
Leading Time	15-45days according to your quantity
Packing	1pc/ctn
Carton size	555249cm

Company Profile

HangZhou Kinglin Seats Manufacturing Co., Ltd is a professional seat manufacturer with years of experience. Our main products are agricultural seats,construction seats,garden seats and other auto parts.
KL Seating was founded in 2001 with an area of 26000 square meters. We have 2 manufacturing bases: HangZhou,ZheJiang and HangZhou,ZheJiang . With skilled employees,KL Seating has the capacity of producing 400,000pcs seats per year.
We have perfect Management System and excellent R&D team. All of our products has passed ISO9001:2008,CE and PAHS certificate. Our products are mainly for Domestic OEM and overseas aftermarket, like Europe,America,Australia,South Asia,etc.
With the Enterprise Principle of customer first, team work, best service, KL seating will do the utmost to provide the comfortable and safety seats, striving to be the global seat designer and manufacturer.

20 years experience in seat manufacturing
Professional team
OEM experience
Perfect quality inspection system
Strictly follow the contracts
Special sample team and workshop
Advanced manufacturing facilities
High-Precision testing equipments
Modern Factory
Mature production technology
One-year Warranty
Reply customers' feedback within 24 hours

KL Seating Testing center

Founded in 2016, the testing center was invested more than RMB2,000,000 with an area of 150sqm. This center processes more than 10 domestic and foreign advanced testing equipments. And more than 30 items of testing ability are introduced. The testing center is mainly for the R&D process for our construction machinery seats, agricultural machinery seats.

Why choose us

1) We can provide you with different types of seatss for your selection.
2) Small MOQ: 1PC, mixed order acceptable, welcome trial order.
3) We can provide samples for your testing.
4) Safety, on-time delivery, excellent quality with competitive price.
5)OEM &ODM service available.

FAQ

Q1-Are you manufacturer or trading company?
We are professional seat manufacturer for seats. And we have more than 15years experience in seat field.

Q2--What is your MOQ?
In general ,Our MOQ is 100-500 pcs. That depend on which seat models. The more seats you order,the more cost you will save. However,for the first trail order, we accept small QTY for trail order,like 50pcs,100pcs,200pcs. And mixed orders are available.

Q3--What is the delivery time ?
Usually 3-5days for samples; 20-25 days for bulk orders.

Q4--Can you give me samples to test and how will the sample order prceed?
Samples are available for testing,but the sample cost and shipping cost will be paid by customers. As the seat packing size is bigger,the shipping cost by air will be too high. So we usggest you order 10-20pcs as the trail order and ship by sea,which will save you a lot cost. And for the small QTY payment,we accept Paypal and WU.

Q5-Do you have any certificate?
Yes we have passed CE and ISO certificate for all our seats.

More information of our products, please do feel free to contact us.
Reply will be available within 24 hours. Thanks!

Please contact us:
qlseat

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft's performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.

China Good quality CE Approved Efgch Agricultural Machinery Grass Cutting Machine Tractor Light Grass Side Lawn Flail Lawn Finishing Mower with Side Shift Hydraulic Linkage near me manufacturer

Product Description

Efgc&Efgch Series Flail Mower

PRODUCT DETAILS:
1.Transmission: By sturdy toothed belts.(VB Belt)
2.Graphite gearbox is made of casting iron
3.The suspension plate shape is made by laser cutting,molding location
4.With adjustable rear roller, the mowing height can be adjusted easily
5.Side protection plates are added CZPT the rear deflection
6.Y shape blades, hammer and straight blades for grass. (Optional for customers.)
7.The blades are under hot dealing and special testing
8.With front protection, to avoid splashing
9. Use powder painting
10.Labels are:water proof, damp proof, CZPT proof, anti-ultraviolet radiation

Guarantee & Warranty: 1.Warranty time:14months,longer than any other Chinese suppliers. 2.With CE CERTIFICATES. 3.All of your ordered machines will be tested to ensure the quality before shipment. 4.We will provide you with the test reports together with the container or sample packages. 5.Even the packages,all of them are guaranteed for customs check or inspections.

CE Approved Efgch Agricultural Machinery Grass Cutting Machine Tractor Light Grass Side Lawn Flail Lawn Finishing Mower with Side Shift Hydraulic Linkage

Main Products

Why Choose Us

Company Profile

HangZhou BETTER. AGRO Industry (B.T.A), as 1 of the leading manufacturers in the production of agricultural equipments, is located in TiHangZhou District, HangZhou, ZheJiang , China, with good location, convenient transportation and complement resources.

B.T.A's motto is "tending to the details others can 't ", and it is committed to creating the top brand in the high-end agricultural machinery. In line with the philosophy of "taking the initiative to participate in market competition", B.T.A spares no effort to design and develop the most professional and the most sophisticated new types of agricultural machinery products.

B.T.A has professional laser cutting machines, fully automatic CNC bending machines, standard welding jigs and automatic spraying production line and other advanced production equipment, as well as excellent technology research and development team. It strictly follows European & American Design and Use Standard and adopts an advanced management system and strict quality control. It not only gives strict product performance assessment according to the field test specification and passed the CE certification, but also constantly improves and upgrades products after user feedback. B.T.A is well known with its superior design, rich varieties and reliable quality, it is especially recognized in the United States, Germany, Netherlands, Belgium, Australia and other countries.

B.T.A is mainly engaged in the research and development, manufacturing and sales of various types of agricultural and garden machinery. Our main products are divided into our categories: farm machinery, garden machinery, forestry machinery and road machinery. Some of our well known products include 3 point linkage rotary tiller, finishing mower, flail mower, verge flail mower, rotary slasher, wood chipper, trailer, spare parts and Japanese tractor accessories, which are exported to over 20 countries.

In the future, B.T.A will further optimize the structure of existing products according to the requirements and characteristics of farmers, satisfy the needs of the international market and establish the perfect after-sales service system.

Certifications

FAQ

Q1. What are your terms of packing?

A: Generally, we pack our goods in bulks or wooden box, suitable for shipping container.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What are your terms of delivery?

A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?

A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends

on the items and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A1:We keep excellent quality, thoughtful after-sales service and competitive price to ensure our customers' benefit;

A2:We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from

The Difference Between Planetary Gears and Spur Gears

A spur gear is a type of mechanical drive that turns an external shaft. The angular velocity is proportional to the rpm and can be easily calculated from the gear ratio. However, to properly calculate angular velocity, it is necessary to know the number of teeth. Fortunately, there are several different types of spur gears. Here's an overview of their main features. This article also discusses planetary gears, which are smaller, more robust, and more power-dense.
Planetary gears are a type of spur gear

One of the most significant differences between planetary gears and spurgears is the way that the 2 share the load. Planetary gears are much more efficient than spurgears, enabling high torque transfer in a small space. This is because planetary gears have multiple teeth instead of just one. They are also suitable for intermittent and constant operation. This article will cover some of the main benefits of planetary gears and their differences from spurgears.
While spur gears are more simple than planetary gears, they do have some key differences. In addition to being more basic, they do not require any special cuts or angles. Moreover, the tooth shape of spur gears is much more complex than those of planetary gears. The design determines where the teeth make contact and how much power is available. However, a planetary gear system will be more efficient if the teeth are lubricated internally.
In a planetary gear, there are 3 shafts: a sun gear, a planet carrier, and an external ring gear. A planetary gear is designed to allow the motion of 1 shaft to be arrested, while the other 2 work simultaneously. In addition to two-shaft operation, planetary gears can also be used in three-shaft operations, which are called temporary three-shaft operations. Temporary three-shaft operations are possible through frictional coupling.
Among the many benefits of planetary gears is their adaptability. As the load is shared between several planet gears, it is easier to switch gear ratios, so you do not need to purchase a new gearbox for every new application. Another major benefit of planetary gears is that they are highly resistant to high shock loads and demanding conditions. This means that they are used in many industries.
Gear

They are more robust

An epicyclic gear train is a type of transmission that uses concentric axes for input and output. This type of transmission is often used in vehicles with automatic transmissions, such as a Lamborghini Gallardo. It is also used in hybrid cars. These types of transmissions are also more robust than conventional planetary gears. However, they require more assembly time than a conventional parallel shaft gear.
An epicyclic gearing system has 3 basic components: an input, an output, and a carrier. The number of teeth in each gear determines the ratio of input rotation to output rotation. In some cases, an epicyclic gear system can be made with 2 planets. A third planet, known as the carrier, meshes with the second planet and the sun gear to provide reversibility. A ring gear is made of several components, and a planetary gear may contain many gears.
An epicyclic gear train can be built so that the planet gear rolls inside the pitch circle of an outer fixed gear ring, or "annular gear." In such a case, the curve of the planet's pitch circle is called a hypocycloid. When epicycle gear trains are used in combination with a sun gear, the planetary gear train is made up of both types. The sun gear is usually fixed, while the ring gear is driven.
Planetary gearing, also known as epicyclic gear, is more durable than other types of transmissions. Because planets are evenly distributed around the sun, they have an even distribution of gears. Because they are more robust, they can handle higher torques, reductions, and overhung loads. They are also more energy-dense and robust. In addition, planetary gearing is often able to be converted to various ratios.
Gear

They are more power dense

The planet gear and ring gear of a compound planetary transmission are epicyclic stages. One part of the planet gear meshes with the sun gear, while the other part of the gear drives the ring gear. Coast tooth flanks are used only when the gear drive works in reversed load direction. Asymmetry factor optimization equalizes the contact stress safety factors of a planetary gear. The permissible contact stress, sHPd, and the maximum operating contact stress (sHPc) are equalized by asymmetry factor optimization.
In addition, epicyclic gears are generally smaller and require fewer space than helical ones. They are commonly used as differential gears in speed frames and in looms, where they act as a Roper positive let off. They differ in the amount of overdrive and undergearing ratio they possess. The overdrive ratio varies from 15 percent to 40 percent. In contrast, the undergearing ratio ranges from 0.87:1 to 69%.
The TV7-117S turboprop engine gearbox is the first known application of epicyclic gears with asymmetric teeth. This gearbox was developed by the CZPT Corporation for the Ilyushin Il-114 turboprop plane. The TV7-117S's gearbox arrangement consists of a first planetary-differential stage with 3 planet gears and a second solar-type coaxial stage with 5 planet gears. This arrangement gives epicyclic gears the highest power density.
Planetary gearing is more robust and power-dense than other types of gearing. They can withstand higher torques, reductions, and overhung loads. Their unique self-aligning properties also make them highly versatile in rugged applications. It is also more compact and lightweight. In addition to this, epicyclic gears are easier to manufacture than planetary gears. And as a bonus, they are much less expensive.

They are smaller

Epicyclic gears are small mechanical devices that have a central "sun" gear and 1 or more outer intermediate gears. These gears are held in a carrier or ring gear and have multiple mesh considerations. The system can be sized and speeded by dividing the required ratio by the number of teeth per gear. This process is known as gearing and is used in many types of gearing systems.
Planetary gears are also known as epicyclic gearing. They have input and output shafts that are coaxially arranged. Each planet contains a gear wheel that meshes with the sun gear. These gears are small and easy to manufacture. Another advantage of epicyclic gears is their robust design. They are easily converted into different ratios. They are also highly efficient. In addition, planetary gear trains can be designed to operate in multiple directions.
Another advantage of epicyclic gearing is their reduced size. They are often used for small-scale applications. The lower cost is associated with the reduced manufacturing time. Epicyclic gears should not be made on N/C milling machines. The epicyclic carrier should be cast and tooled on a single-purpose machine, which has several cutters cutting through material. The epicyclic carrier is smaller than the epicyclic gear.
Epicyclic gearing systems consist of 3 basic components: an input, an output, and a stationary component. The number of teeth in each gear determines the ratio of input rotation to output rotation. Typically, these gear sets are made of 3 separate pieces: the input gear, the output gear, and the stationary component. Depending on the size of the input and output gear, the ratio between the 2 components is greater than half.
Gear

They have higher gear ratios

The differences between epicyclic gears and regular, non-epicyclic gears are significant for many different applications. In particular, epicyclic gears have higher gear ratios. The reason behind this is that epicyclic gears require multiple mesh considerations. The epicyclic gears are designed to calculate the number of load application cycles per unit time. The sun gear, for example, is +1300 RPM. The planet gear, on the other hand, is +1700 RPM. The ring gear is also +1400 RPM, as determined by the number of teeth in each gear.
Torque is the twisting force of a gear, and the bigger the gear, the higher the torque. However, since the torque is also proportional to the size of the gear, bigger radii result in lower torque. In addition, smaller radii do not move cars faster, so the higher gear ratios do not move at highway speeds. The tradeoff between speed and torque is the gear ratio.
Planetary gears use multiple mechanisms to increase the gear ratio. Those using epicyclic gears have multiple gear sets, including a sun, a ring, and 2 planets. Moreover, the planetary gears are based on helical, bevel, and spur gears. In general, the higher gear ratios of epicyclic gears are superior to those of planetary gears.
Another example of planetary gears is the compound planet. This gear design has 2 different-sized gears on either end of a common casting. The large end engages the sun while the smaller end engages the annulus. The compound planets are sometimes necessary to achieve smaller steps in gear ratio. As with any gear, the correct alignment of planet pins is essential for proper operation. If the planets are not aligned properly, it may result in rough running or premature breakdown.

China Good quality CE Approved Efgch Agricultural Machinery Grass Cutting Machine Tractor Light Grass Side Lawn Flail Lawn Finishing Mower with Side Shift Hydraulic Linkage near me manufacturer

China Standard 4WD 85HP 90HP 95HP 100HP Agricultural Machinery Farm Tractor Factory Direct Supply with Free Design Custom

Product Description

Packaging & Delivery
Packaging Details:completed package 40HQ can load 2 units
Delivery Time:Shipped in 20 days after payment

4WD 85HP 90HP 95HP 100HP Agricultural Machinery Farm Tractor Factory Direct Supply

Product Description

Product Model	HB1004
Wheel Drive	4x4
Dimension(LWH)mm	4530X2050X2930
Weight(kg)	3840
Front wheel Tread(mm)	1490,1580,1650,1740 adjustable
Rear Wheel(mm)	1520-1850unlimited adjustable
Wheel Base(mm)	2195
Minimum Land Clearance	405mm
Gear shifts	16F+8R
Tyre Size	18.4-34/14.9-24
Steering gear	Hydraulic steering
Rear Suspension	Three-point Suspension
Engine Specification
Engine Model	YTO LR6M5-23 / QC6110
Type	Water cooled ,Vertical,4 stroke and Direct injection
Rated Power(kW)	73.5
Rated Revolution(r/min)	2300/2400
Start Way	Electricity Start
Transmission	4×(2+1)×2 shifts
Clutch	Single chip,Dry friction, Double clutch
PTO Speed	6 spline 540/720 or 540/1000

This series of tractors is a multi-purpose, high-powered agricultural wheeled tractors, which has the characteristics of aompact structure, convenient operation, flexible steering, large tractor,wide use, convenient maintenance and so on. TD large rear axle, four-wheel drive, 16F+8R fear transmission, full hydraulic power steering, double clutch, comprehensive adjustment of force and position, floating control suspension. It can be equipped with safety frame,hydraulic multi-way valve,warm air and air conditioning cabin.

Company Overvie

About us---HangZhou CZPT Agricultural Equipment Co., Ltd is Located in the world's capital of kite and the city of green power-HangZhou. It is in the Economic Development Area of HangZhou and only 3 kilometers to the expressway station of HangZhou West, the traffic is very convenient.

The area of the company and its factory is about 2000, 000 square meters and is 1 modern private enterprise with research, production, and sale. The company has pursued perfect and done things seriously. It has the courage of innovation and has insisted on the production idea of high standard and high quality so its products have been optimized and upgraded constantly. And then the enterprise developed and grown steadily. The company has strong technology force and superior machine and equipments with the auto assemaly line which is advanced in China. The products are in strict compliance with the international norms of quality system and have mature guarantee service system so they have adopted 2000 edition ISO9001 international quality management system certificate. Futher more, CZPT brand products have ever been awarded national patents 10 times by the State Intellectual Property Office.

FAQ
(1). Manufacturer or Trading Company
We are a leading tractor manufacturer for 14 years, and specialize in 12-150Hp tractors in China.
(2). MOQ
1 unit
(3). Spare Parts
Free toolbox and easy wear parts.
(4). Shippment
We can help you arrange shippment.
(5). Delivery Time
Usually 25 days
(6). Warranty Time
Complete service system, 18 months since arrival of destination port
(7). Payment Terms
We accept 30%T/T in advance, and 70% T/T after shipping or L/C at sight.
(8). Tractor Options
Can be equipped with ROPS, Canopy, Cabin, AC Cabin, Air Brakes, Hydraulic Valve Out, Paddy Tire, Turf Tire or as per your requirements.
(9). Tractor Logo
We have our own logo. And we also can make your own logo in your order for free.
(10). Package and Loading qty
1.Nude Package: 3 complete units/40GP, 3 complete units with Cabin/40HQ
2.SKD Iron Frame Package: 8 units/40HQ
(11). Tractor Implements
Loader, Mower, Plough, Trailer, Slasher, Snow Blower or as per your requirements.
(12). Part supply
Complete Parts Workshop, and can supply all parts, pic as below
For More Details, Please contact us

The Different Types of Splines in a Splined Shaft

Involute splines

Parallel splines

Serrated splines

Ball splines

Sector no-go gage

China Standard 4WD 85HP 90HP 95HP 100HP Agricultural Machinery Farm Tractor Factory Direct Supply with Free Design Custom

China Hot selling 100HP Farm 4WD Tractor with Canopy and Cheap Price for Sale Made in China wholesaler

Product Description

Product Description:

100hp 4wd China agriculture manufacturer price farming tractors for sale

This model 100hp 4wd tractor sells very well for its good quality and cheap price.
We export this model tractors most to Europe, America, Australia and Brizil and other countries, they are very popular in the market.
With beautiful appearance, this tractor is also multi-functional. It can match all kinds of farming implements.

Pictures:

Standard Equipments:

YT4B3Z Engine,6 Cylinders,16+8 Gear Shift,With Dual-Stage Clutch,Power Steering,Trailer outlet,
protection plate,Tires:12.4-24/16.9-34,hand throttle wire ,4x4 Wheel Drive,3-Point Linkage,
Rear PTO 540/1000, Multi-Way Valve,Front Ballast,Rear Ballast,Color follow your need.

Options:
Cab,Canopy,Air Brake,Tilting Draw Bar,

110hp 4wd Tractor Specs

Model					1004
(mm)Dimensions of Tractor		Length (to front ballast)			4830
		Width			2050
		Height (to the exhaust vent)			2810
		Tread	Front Wheel		1610-1950
			Rear Wheel		1608-1996
		Axle Base			2366
		Min.Ground Clearance			470
Structure weight (kg)					4205
Ballast weight (kg)		Front ballast			360
		Rear ballast			440
Rated traction force (kN)					25
Engine	Model			YTO YT4B3Z
	Type			Vertical,4-Cylinder,Water Cooled and 4-stroke
	Rated Power(kw)			74kW
	Rated speed (r/min)			2300
	Fuel			Diesel
Tyre	Front Wheel			12.4-24
	Rear Wheel			16.9-34
Clutch				Dry, Dual-stage clutch
Steering				power steering
Transmission Type				16F+8R Shuttle shift/ Creeper gear shift
Suspension Type				3-point links
PTO		Type and Rev			Semi-independent Type 760/1000 or540/1000 (optional)
		Spline Size			F35 Rectangle Spline with 6 teeth

TZ-10 Front End Loader with 4 - in - 1 Bucket Specifications:

Model	TZ-10
Bucket capacity(m³)	1.45
Rated Load(Kg)	1200
Overall dimensions(mm)	5850×2100×3600
Max. dump height(mm)	4100
Max. dump distance(mm)	1400
Bucket rollback angle (degree)	42⁰
Max. unloading angle (degree)	46⁰
Max. scraping depth(mm)	160
Lifting time to pivot pin(s)	10
Descending time(s)	10
Recommended Tractor(hp)	140-160

LW-10 Backhoe Specifications:

Model	LW-10
Bucket Capacity(m³)	0.07
Bucket Wide(mm)	550
Max.digging depth(mm)	3500
Max.digging Radius(mm)	4300
Max.digging Height(mm)	4300
Discharging Height(mm)	2770
Max.digging depth(2ft) Flat bottom(mm)	3350
Swing Angle(degree)	180°
Bucket Rotation(degree)	172°
Dipper stick CZPT Force(Kg)	2700
Operating pressure(Mpa)	16

Packaging & Delivery:

-3 units inside 1x40'fcl assembled,
-Delivery time: 30 days after receiving your deposit

Company Information:

Our service:

Certifications:

FAQ:

Types of Miter Gears

The different types of miter gears include Hypoid, Crown, and Spiral. To learn more, read on. In addition, you'll learn about their differences and similarities. This article will provide an overview of the different types of miter gears. You can also choose the type that fits your needs by using the guide below. After you've read it, you'll know how to use them in your project. You'll also learn how to pair them up by hand, which is particularly useful if you're working on a mechanical component.
gear

Bevel gears

Bevel and miter gears are both used to connect 2 shafts that have different axes. In most cases, these gears are used at right angles. The pitch cone of a bevel gear has the same shape as that of a spur gear, except the tooth profile is slightly tapered and has variable depth. The pinions of a bevel gear are normally straight, but can be curved or skew-shaped. They can also have an offset crown wheel with straight teeth relative to the axis.
In addition to their industrial applications, miter gears are found in agriculture, bottling, printing, and various industrial sectors. They are used in coal mining, oil exploration, and chemical processes. They are an important part of conveyors, elevators, kilns, and more. In fact, miter gears are often used in machine tools, like forklifts and jigsaws.
When considering which gear is right for a certain application, you'll need to think about the application and the design goals. For example, you'll want to know the maximum load that the gear can carry. You can use computer simulation programs to determine the exact torque required for a specific application. Miter gears are bevel gears that are geared on a single axis, not two.
To calculate the torque required for a particular application, you'll need to know the MA of each bevel gear. Fortunately, you can now do so with CZPT. With the help of this software, you can generate 3D models of spiral bevel gears. Once you've created your model, you can then machine it. This can make your job much easier! And it's fun!
In terms of manufacturing, straight bevel gears are the easiest to produce. The earliest method for this type of gear is a planer with an indexing head. Since the development of CNC machining, however, more effective manufacturing methods have been developed. These include CZPT, Revacycle, and Coniflex systems. The CZPT uses the Revacycle system. You can also use a CNC mill to manufacture spiral bevel gears.
gear

Hypoid bevel gears

When it comes to designing hypoid bevel gears for miter and other kinds of gears, there are several important parameters to consider. In order to produce high-quality gearings, the mounting distance between the gear teeth and the pinion must be within a predefined tolerance range. In other words, the mounting distance between the gear teeth and pinion must be 0.05 mm or less.
To make this possible, the hypoid bevel gearset mesh is designed to involve sliding action. The result is a quiet transmission. It also means that higher speeds are possible without increasing noise levels. In comparison, bevel gears tend to be noisy at high speeds. For these reasons, the hypoid gearset is the most efficient way to build miter gears. However, it's important to keep in mind that hypoid gears are not for every application.
Hypoid bevel gears are analogous to spiral bevels, but they don't have intersecting axes. Because of this, they can produce larger pinions with smooth engagement. Crown bevel gears, on the other hand, have a 90-degree pitch and parallel teeth. Their geometry and pitch is unique, and they have particular geometrical properties. There are different ways to express pitch. The diametral pitch is the number of teeth, while circumferential measurement is called the circumference.
The face-milling method is another technique used for the manufacture of hypoid and spiral bevel gears. Face-milling allows gears to be ground for high accuracy and surface finish. It also allows for the elimination of heat treatment and facilitates the creation of predesigned ease-off topographies. Face-milling increases mechanical resistance by as much as 20%. It also reduces noise levels.
The ANSI/AGMA/ISO standards for geometric dimensioning differ from the best practices for manufacturing hypoid and bevel gears. The violation of common datum surfaces leads to a number of geometrical dimensioning issues. Moreover, hypoid gears need to be designed to incorporate the base pitches of the mating pinion and the hypoid bevel gear. This is not possible without knowing the base pitch of the gear and the mating pinion.

Crown bevel gears

When choosing crown bevels for a miter gear, you will need to consider a number of factors. Specifically, you will need to know the ratio of the tooth load to the bevel gear pitch radius. This will help you choose a bevel gear that possesses the right amount of excitation and load capacity. Crown bevels are also known as helical gears, which are a combination of 2 bevel gear types.
These bevel gears differ from spiral bevels because the bevels are not intersected. This gives you the flexibility of using a larger pinion and smoother engagement. Crown bevel gears are also named for their different tooth portions: the toe, or the part of the gear closest to the bore, and the heel, or the outermost diameter. The tooth height is smaller at the toe than it is at the heel, but the height of the gear is the same at both places.
Crown bevel gears are cylindrical, with teeth that are angled at an angle. They have a 1:1 gear ratio and are used for miter gears and spur gears. Crown bevel gears have a tooth profile that is the same as spur gears but is slightly narrower at the tip, giving them superior quietness. Crown bevel gears for miter gears can be made with an offset pinion.
There are many other options available when choosing a Crown bevel gear for miter gears. The material used for the gears can vary from plastics to pre-hardened alloys. If you are concerned with the material's strength, you can choose a pre-hardened alloy with a 32-35 Rc hardness. This alloy also has the advantage of being more durable than plastic. In addition to being stronger, crown bevel gears are also easier to lubricate.
Crown bevel gears for miter gears are similar to spiral bevels. However, they have a hyperbolic, not conical, pitch surface. The pinion is often offset above or below the center of the gear, which allows for a larger diameter. Crown bevel gears for miter gears are typically larger than hypoid gears. The hypoid gear is commonly used in automobile rear axles. They are useful when the angle of rotation is 90 degrees. And they can be used for 1:1 ratios.
gear

Spiral miter gears

Spiral bevel gears are produced by machining the face surface of the teeth. The process follows the Hertz theory of elastic contact, where the dislocations are equivalent to small significant dimensions of the contact area and the relative radii of curvature. This method assumes that the surfaces are parallel and that the strains are small. Moreover, it can reduce noise. This makes spiral bevel gears an ideal choice for high-speed applications.
The precision machining of CZPT spiral miter gears reduces backlash. They feature adjustable locking nuts that can precisely adjust the spacing between the gear teeth. The result is reduced backlash and maximum drive life. In addition, these gears are flexible enough to accommodate design changes late in the production process, reducing risk for OEMs and increasing efficiency and productivity. The advantages of spiral miter gears are outlined below.
Spiral bevel gears also have many advantages. The most obvious of these advantages is that they have large-diameter shafts. The larger shaft size allows for a larger diameter gear, but this means a larger gear housing. In turn, this reduces ground clearance, interior space, and weight. It also makes the drive axle gear larger, which reduces ground clearance and interior space. Spiral bevel gears are more efficient than spiral bevel gears, but it may be harder to find the right size for your application.
Another benefit of spiral miter gears is their small size. For the same amount of power, a spiral miter gear is smaller than a straight cut miter gear. Moreover, spiral bevel gears are less likely to bend or pit. They also have higher precision properties. They are suitable for secondary operations. Spiral miter gears are more durable than straight cut ones and can operate at higher speeds.
A key feature of spiral miter gears is their ability to resist wear and tear. Because they are constantly being deformed, they tend to crack in a way that increases their wear and tear. The result is a harder gear with a more contoured grain flow. But it is possible to restore the quality of your gear through proper maintenance. If you have a machine, it would be in your best interest to replace worn parts if they aren't functioning as they should.

China Hot selling 100HP Farm 4WD Tractor with Canopy and Cheap Price for Sale Made in China wholesaler

China manufacturer CZPT Forklift Seat Black PVC Tractor Seat Adjustable Mower Seat Including Seat Switch and Back Seat Organizer for Documents, Skid Steer Seat wholesaler

Product Description

About this item

* Universal fitting forklift seat Fit for most Forklift Brand on Market (Cat, Clark, Komatsu, Nissan, Yale, Toyota, Hyster) some model may require minor drilling
* The seat is designed for the heaviest mechanical seat, such as forklifts, dozers, aerial lifts, floor scrubbers, riding mowers,
tractors, excavator and trenchers, and much more
* Ergonomic design relieves stress and sore back plus a curved back padding for strong support
* Seamless molded and contoured cushions help to ensure operator comfort

* High quality PVC outside and polyurethane sponge inside, capable of high-temperature resistance and waterproof. It is also durable and will not be out of shape easily
* Universal forklift seat is made of polyurethane sponge and definitely will bring you a comfortable experience.
* Seat belt for added safety
Specification
* Color: Black
* Material: PVC
* Common Usage: Seat Assembly
* Fitting: Universal Fit
* Foldable: No
* Folding Armrest: No
* Mounting Hardware Included: No
* Mounting Size
Side to Side: 230mm x 280mm
Front to Back: 330mm x 280mm

Detailed Photos

Packaging & Shipping

Model NO. YY51

Batch Delivery Solution - For Batch goods, usually we will choose sea shipping. More cost-effective than other methods. Any requirement will be considered for better business cooperation.

Specification
N.W	12kgs
Leading Time	15-45days according to your quantity
Packing	2pcs/ctn
Carton size	675654cm
Container	20'':216pcs 40'':456pcs

Our Services
1.Sample Policy:	You can test the quality of our sample firstly before you purchase them in mass quantity.
2.Payment Way	T/T, L/C, Western Union, Paypal .
3.Delivery Date	10-25 days after deposit paid. It depend on your order quantity.
4. Shipping Way	10-25 days after deposit paid. It depend on your order quantity.
4. Shipping Way	By Sea or By Air.

Company Profile

HangZhou Kinglin Seats Manufacturing Co., Ltd is a professional seat manufHangZhou Kinglin Seats Manufacturing Co., Ltd is a professional seat manufacturer with years of experience. Our main products are agricultural seats,construction seats,garden seats and other auto parts.

KL Seating was founded in 2001 with an area of 26000 square meters. We have 2 manufacturing bases: HangZhou,ZheJiang and HangZhou,ZheJiang . With skilled employees,KL Seating has the capacity of producing 400,000pcs seats per year.

We have perfect Management System and excellent R&D team. All of our products has passed ISO9001:2008,CE and PAHS certificate. Our products are mainly for Domestic OEM and overseas aftermarket, like Europe,America,Australia,South Asia,etc.

With the Enterprise Principle of customer first, team work, best service, KL seating will do the utmost to provide the comfortable and safety seats, striving to be the global seat designer and manufacturer.

KL Seating Testing center

Why choose us

FAQ

1. How can I confirm whether your products will fit for my machine?
- You can tell us the mounting size, then our professional sales will reply you. And we do supply OEM service.

2. How do you pack the products?
- Usually we pack the products by normal export carton. The carton size is depended on your goods. And we do supply the OEM package service.

3. How about the delivery time?
- Generally it will takes 10 to 30 days after receiving your deposit. The specific date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.

4. How about the price?
- To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.

5. How can I trust you?
- We have 12 years of experience in the seat manufacturing field;
- We have supplied for many famous company at home and abroad;
- We want to provide great service for you rather than just provide a price and product for you;
- To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.

Welcome to your inquiry.
qlseat

What is a bushing?

A bushing is a cylindrical lining made of a flexible material inside a metal housing. The inner squeeze tube of the bushing helps prevent it from being squeezed by the clip. The material also reduces friction and isolates vibration and noise, while improving performance. This article discusses some of the most common uses for bushings. In this article, we'll discuss the most important reasons to choose a bushing for your transmission.
DESCRIPTION Anti-friction cylindrical lining

A bushing is a bearing that minimizes friction and wear within the bore. It is also used as a housing for shafts, pins, hinges or other types of objects. It takes its name from the Middle Dutch word shrub, which means "box". It is also homologous to the second element of blunderbuss. Here's how to identify bushings and how to use them.
bushing

Vibration isolation

Vibration mounts are required for inertial guidance and navigation systems, radar components, and engine accessories. Bushings isolate vibration and provide a more robust design in these applications. Bushings help eliminate vibration-related operational challenges and help protect expensive equipment from damage. Below are several types of vibrating mounts and the differences between them. Each type has unique uses and applications, and the type you choose will depend on the nature of the components and the environment.
Vibration isolation is an important safety feature of many modern machines and instruments. Used to reduce the dynamic consumption that an object suffers at runtime. Instead, it protects equipment and structures from amplitude-related damage. Bushings insulate objects from vibration by reducing the amount of dynamic action transferred from the object to the support structure. Bushings are a popular choice for vibration equipment manufacturers.
Vibration isolation is important in many industrial applications. Vibration can wreak havoc on electronic and mechanical equipment. The forces exerted by vibration can reduce the life expectancy of equipment, leading to premature failure. The cost of isolation depends on the weight of the object being isolated. Most isolators have minimum damping in the isolation region and maximum damping at natural frequencies. In addition, the cost of installation, transportation and maintenance is usually included in the cost.
In addition to providing shock and vibration isolation, bushings help stabilize components by absorbing shock. These devices may need to be replaced in the long run, and your machine design may dictate whether you need to buy more than one. Bushings are an important part of your equipment, so don't skimp on quality when choosing a vibration isolation mount. You won't regret it. They won't break your budget, but will keep your equipment safe.
bushing

reduce noise

A properly positioned tree will block the view between the noise source and your house. Make sure the tree is taller than your house to effectively reduce noise. Also, make sure the sprocket and axle are properly aligned. The less noise they make, the better. If you have a noisy neighbor, you may want to consider installing a bushing at the front of the house to block the noise.
While it's possible to replace the bushing yourself, it's best to make sure you follow some basic procedures first. Park your car on level ground and apply the brakes before removing the hood. Check that the wheels move freely. Remember to wear gloves and goggles, and don't cut yourself with sharp objects when changing bushings. If you can't see under the hood, try opening the hood to allow more light to reach the engine area.
SuperPro bushings are designed to reduce noise and vibration in the automotive industry. They are a popular choice for aftermarket bushing manufacturers. While OE rubber bushings are soft and quiet, these polyurethane bushings are specifically designed to eliminate these noise issues. By determining the diameter of your vehicle's anti-roll bars, you can choose the right bushing for your vehicle. You'll be glad you did!
Damaged bushings can cause the stabilizer bar to become unstable. This, in turn, can cause the steering components to misalign, creating a loud ding. Worn bushings can also cause the wheel to squeak as it moves. If they're worn, you'll hear squeaks when cornering. You may even hear these noises when you are turning or changing lanes.
bushing

a bearing

A bushing is a component that provides a bearing surface for the forces acting axially on the shaft. A typical example of a thrust bearing is a propeller shaft. The bushing can be a separate part or an integral part of the machine. Typically, bushings are replaceable, while integral bearings are permanent and should not be replaced unless worn or damaged. Bushings are most commonly used in machinery, where they allow relative movement between components.
The bushing is usually an integral unit, while the bearing may have several parts. Simple bushings can be made of brass, bronze or steel. It is often integrated into precision machined parts and helps reduce friction and wear. Typically, bushings are made of brass or bronze, but other materials can also be used. Different designs have different applications, so you should understand what your application requires before purchasing a sleeve.
The most common uses of plain bearings are in critical applications, including turbines and compressors. They are also commonly used in low-speed shafting, including propeller shafts and rudders. These bearings are very economical and suitable for intermittent and linear motion. However, if your application does not require continuous lubrication, a plain bearing may not be required.
Another popular use for sleeves is in food processing. These bearings can be made from a variety of materials, including stainless steel and plastic. Plastic bearings are more cost-effective than metal and are an excellent choice for high-speed applications. These materials are also resistant to corrosion and wear. However, despite their high cost, they can be made from a variety of materials. However, in most cases, the materials used for plain bearings are aluminum nickel, phosphorus and silicon.

China manufacturer CZPT Forklift Seat Black PVC Tractor Seat Adjustable Mower Seat Including Seat Switch and Back Seat Organizer for Documents, Skid Steer Seat wholesaler